Skip to content
Great AmericanBuilt to be trusted
Versa line

Versa Spillway

Gravity does the work.

Versa Spillway installation
Part number
GA20
Line
Versa
Sizes
Widths 2, 4 and 6 in. · Height 2 in. · Lengths 12 and 18 in.
Feed
Gravity or low pressure
Finishes
White · Black · Gray · Tan · Hammered Copper · Hammered Bronze · Hammered Silver

A Spillway is the Versa nozzle on its own. No body assembly, no pump, no balancing. It sets into a raised wall or bond beam and lets gravity carry water over a finished edge. Twelve or 18 inches long, three widths, four profiles, and seven finishes that all price the same.

The Spillway is the entry point to the Versa line, and it is deliberately the least complicated thing we make. There is no body assembly and no pressurized feed. Water arrives by gravity or low pressure from a raised structure, crosses the nozzle, and falls clean.

That makes it the right call for spa spillovers, raised bond beams, and scupper walls where the elevation change is already doing the work. When a job needs pump-fed delivery or self-balancing across multiple outlets, Spout Pro picks up from here.

What you specify

Three standard nozzle widths at 2, 4, and 6 inches. Standard height is fixed at 2 inches. Two lengths at 12 and 18 inches. All dimensions are called out as inside dimension, with the quarter-inch ABS wall adding a half inch to width and height on the outside.

Four profiles: Square, Bevel, Angle, and Scallop. Square is the base. The other three carry the same fee as one another, so the choice is aesthetic rather than budgetary.

Seven finishes: White, Black, Gray, Tan, Hammered Copper, Hammered Bronze, and Hammered Silver. Every finish prices identically. Versa ships painted on nearly every order, so the finish is part of the product rather than an upcharge. Pick the one the job wants.

Modifications

Dimensions between standards round up to the next standard size and carry a modification fee per dimension changed. Anything past the standard range, a non-standard profile, or a non-standard material goes to a custom quote. Because Spillway height is fixed at 2 inches, any other height is custom by definition.

  • Versa Spillway installation
  • Versa Spillway installation

Ready to spec your next project?